Solar-Log 1200 User Manual Download Page 36

Page: 36 / 158

Operating via a web browser within your own network

Tracker comparison

To access the Tracker comparison menu, go to

Diagnostic | Inverter Diagnostic | Tracker comparison.

Two trackers (either from the same device or two different devices) can be compared on a particular date

by selecting the date, device and tracker.

Fig.: Tracker comparison graph

In the example (see Fig.: Tracker comparison graph), two different inverters have been selected and evalu-

ated. ***the better view has been selected for the DC voltage 1 and 2 values.

The two strings from inverter 6 and 7 are directly compared to each other.

The gray line displays the degree of deviation. The deviation is indicated as a percentage in the right col-

umn and displayed as a positive or negative percentage. In the example, the deviation between the strings

is from about -5% to +5%. The column on the left indicates the kW/kWp output of the tracker.

All of the displayed values can be directly selected and deselected at any time by clicking in the graph key

(upper-right corner of the graph).

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands