manualshive.com logo in svg

Solar-Log 1200, User Manual, Page: 50 / 158

Share
Download
Solar-Log 1200 User Manual Download Page 50

50

Operating via a web browser within your own network

2.10.8 Accessing Support

To access the 

Support

 menu, go to 

Diagnostic | Support.

 
Fig.: Support - General

There are three sections under the 

Support | General

 menu:

• 

System Information:

The following information is available in this tab:

• 

Model (type of Solar-Log™).

• 

Hardware (hardware components available for the device).

• 

Solar-Log™ serial number.

• 

Firmware Version and date.

• 

Revision number.

• 

RTOS (Solar-Log™ operating system).

• 

CLIB (Version number of the Solar-Log™ library used).

• 

Creating diagnostic reports:

You have the option to create and download a diagnostic report. This can be sent to Solar-Log support for 

analysis. (See Fig.: Support - General.)

• 

Creating screenshots:

You have the option to create and download screenshots of the display in this section. This can be used to 

document errors on the Solar-Log's internal display. (See Fig.: Support - General.)

Summary of Contents for 1200































































































































































Reviews:

No comments