Solar-Log 1200 User Manual Download Page 7

Page: 7 / 158

General Information

1 General Information

This user manual is intended to assist you in the operation of the Solar-Log™. The yield data from the Solar-

Log™ can be displayed in several ways:

•

via a web browser in a local network (LAN) (Chapter 2)

•

via the display (touch screen: only Solar-Log 1000, 1200 and 2000) directly on the device (Chapter

•

via the Internet (Chapter 5) or

•

with the Solar-Log™ App (Chapter 6 and 7)

Our product documentation is being constantly updated and expanded.

The current versions of the documents can be downloaded from our website:

www.solar-log.com.

The descriptions in this manual refer to firmware version 3.1.

Note:

Some of the descriptions contain screenshots with the LCD view in the top-left.

The view is from the transfer of data from the LCD display on the Solar-Log™. The

LCD on the device, however, is only available with the Solar-Log 300, 1200 and

2000.

1.1

The necessary steps for precision monitoring of your PV plant with the

Solar-Log™

•

Connecting and detecting inverters, refer to the

"Inverter Connection Manual"

and the "Configur-

ing Connected Devices" chapter in the

Installation Manual

•

Configuring inverters, generator output, MPP Trackers and module fields, refer to the "Configuring

Connected Devices" chapter in the

Installation Manual.

•

For configuring the notification function and status messages from the inverter, refer to the "Con-

figuring Notifications" chapter in the

Installation Manual

•

For activating and configuring performance monitoring, refer to the "Configuring Connected De-

vices" chapter in the

Installation Manual

Note:

The Solar-Log needs a continuous supply of electricity to avoid data loss and to

ensure precision monitoring of the PV plant

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands