manualshive.com logo in svg

Sokon Automotive DFSK Glory 580, Handbook

Share
Download
Sokon Automotive DFSK Glory 580 Handbook Download Page 65

Lights 

Front light cluster

1.   Side lights
2.   Headlights, low beam
3.   Headlights, high beam
4.   Indicator
5.   Daytime running lights 

For the above lights please refer to light combination switch 
instructions; Daytime running lights for the automatic

Front fog lamps 

For the front fog lamp operation, please refer to the instructions 
of the light combination switch.

Indicators 

Refer to the instruction manual for the light combination switch 
for the directional indicators.

Front reading lamp and rear indoor lamp 

Refer to Indoor Lighting Instruction Manual for the front reading 

lamp and rear indoor lamp opening method.

Rear light cluster

The rear combination lamp function includes: 

1.  Side lights
2.  Brake lights
3.  Indicators
4.  Reversing lights

For the position of the side lights please refer to the instructions 
of the light combination switch.
When depressing the brake pedal, the brake light will turn on.
When the shift lever is in the reverse gear position, the reverse 
light will turn on.

64

Maintenance

Summary of Contents for DFSK Glory 580
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands