manualshive.com logo in svg

Sokon Automotive DFSK Glory 580, Handbook

Share
Download
Sokon Automotive DFSK Glory 580 Handbook Download Page 58

Storage of damaged wheels and tools

 

!

 Warning

Be sure to store the wheel, jack and tools properly after use.  

1.  Damaged tyres, jacks and used tools should be properly 

stored in the storage area. 

2.  Close the tailgate.

Jump start   

  

If the jump start battery is in another vehicle, bring the two cars 
close together to connect the two batteries.

1.  Press and release the parking brake. 

2.  Position the gear in the “N” (neutral) position. 

3.  Turn off all unnecessary instruments (eg hazard warning 

lights etc.). 

4.  Ensure the engine is switched off. 

5.  Remove the battery cover. 

6. 

 Connect the leads as shown in the figure  ( 1 - 2 , 3 - 4 ).  

 

!

 Warning

• 

Make sure that the jump lead is not touching the moving 

parts.

• 

Make sure that the jump lead is not in contact with any other 

metal parts.

1.  Start the auxiliary vehicle engine and run for a few minutes. 

2.  Depress the accelerator pedal of the auxiliary car to  

approximately 2000 rpm. 

3.  Start your vehicle’s engine in the normal way. 

4.  When the engine is running, disassemble the jump leads 

 in the reverse order ( 4 , 3 , 2 , 1 ) shown in the illustration.

  

57

Emergency Measures

Summary of Contents for DFSK Glory 580
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands