Sokon Automotive DFSK Glory 580 Handbook Download Page 41

Page: 41 / 79

Check And Adjust Before Driving

Petrol filler cap

Warning

• Do not smoke or allow anyone to smoke near the vehicle

when opening the petrol filler cap.

• Fuel may be under pressure, so loosen the fuel tank cap half

a turn and wait until “hissing” ceases before opening the

filler cap completely to prevent personal injury from fuel

sprays.

Operating the fuel filler cap

Pull the petrol filler cap opening handle at the foot of the

driver’s door threshold.

The cover will open, you can now see the fuel tank cap. Remove
the cap by unscrewing it anti-clockwise 1 open the fuel tank
cap. After refuelling, clockwise 2 twist to close the tank cover.

The tank cap 3 can be hung at the side of the fuel filler cap.

Rearview Mirror

Warning

Before you start, check the position and angle of all the mirrors.
Do not adjust the rearview mirrors when driving the car.

Interior mirrors

Grasp the rearview mirror
and adjust the angle until you
reach the proper position.

Exterior mirrors

Warning

• Do not touch the exterior mirror whilst it is moving to avoid

damage.

• Do not drive the vehicle when the exterior mirror is in the

folded position, as this will reduce the your rear view.

• The object is closer than it appears to be in the exterior

mirrors

Summary of Contents for DFSK Glory 580
















































































Search results

Summary of Contents for DFSK Glory 580

Reviews:

Brands by name

Popular brands

Sokon Automotive DFSK Glory 580, Handbook

Search results

Summary of Contents for DFSK Glory 580

Reviews:

Brands by name

Popular brands