Sokon Automotive DFSK Glory 580 Handbook Download Page 31

Front and rear fog lights switch

When the front light is turned on, if the front fog lamp is turned 
on, the fog light switch knob is turned upward once, the front 
fog lamp is lit, the switch automatically returns to the OFF 
position, and then the fog lamp switch knob is rotated upward. 
The switch automatically returns to the OFF position; to turn off 
the fog lamp, turn the fog light switch knob down once.
Turn the fog light switch knob once and the front fog lamp goes 
off.

Headlight Height Adjustment  Control 

When the ignition is turned on  and the 
headlight is on adjust the headlight control so 
as not to dazzle oncoming road users. This will 
need to be adjusted when carrying heavy loads 
within the car.

Wiper and wash switch 

 

!

 Warning

 At freezing temperatures, the screenwash may freeze on the 
windscreen.

 CAUTION

Do not run the washing solution continuously for more than 30 
seconds.

Windscreen wipers and wash

The front windscreen wiper and screenwash are operational 
when the ignition is on.

Wiper operation

“INT” will operate the 
wiper intermittently.
 
The “AUTO” position 
will enable automatic 
operation when the 
sensor detects rain and will adjust the wiping speed accordingly. 

The “LOW” position will make the wiper operate at low speed.    

The “HI” position will make the wiper work operate at high 
speed.  
To stop the wiper move the lever up to the “OFF” position.

The “MIST” position will sweep the wiper once. The lever then 

automatically returns to its original position.

Washer operation

To operate the screenwash, lift the wiper switch handle upwards 

until the desired amount of wash fluid is sprayed on the 

windscreen. The wiper then automatically operates several times.

Instrumentation And Control Switches

30

Summary of Contents for DFSK Glory 580
















































































Reviews: