Sokon Automotive DFSK Glory 580 Handbook Download Page 55

Page: 55 / 79

VII. Emergency Measures

Vehicle tools

Triangle warning signs and vehicle tools are in the storage box

under the boot floor.

Note

It should be ensured that the vehicle toolbag is securely
fastened.

Triangle warning signs

Note

Triangle warning signs must be used in accordance with the law.

Tool kit bag

Tool kit:

• Wheel nut wrench
• Combination

screwdriver

• Tool bag
• Scissor jack
• Tow hook

Note

• Before returning the jack to the tool kit ensure the arms are

returned to their original position.

• This jack is supplied by the manufacturer and is specially

designed for use with the corresponding models. Do not use
it to lift a larger mass of vehicles or another load.

• Do not start the vehicle while it is being held up by the jack.

• When working under the vehicle, the vehicle body must be

securely supported by an appropriate support block.

Flat tyre

If your vehicle tyre needs to be replaced follow the instructions
below:

Parking

Warning

• Be sure to apply the electronic parking brake.

•

Confirm that the automatic transmission gearshift is in the

“P” position.

•

Only change your tyre on a flat road surface.

Emergency Measures

Summary of Contents for DFSK Glory 580
















































































Search results

Summary of Contents for DFSK Glory 580

Reviews:

Brands by name

Popular brands

Sokon Automotive DFSK Glory 580, Handbook

Search results

Summary of Contents for DFSK Glory 580

Reviews:

Brands by name

Popular brands