manualshive.com logo in svg

Sokon Automotive DFSK Glory 580, Handbook

Share
Download
Sokon Automotive DFSK Glory 580 Handbook Download Page 51

Electric Power Steering System 

!

 Warning

If the engine is turned off or cuts out while the vehicle is 
travelling the power steering system will not work and steering 
will become harder.

The electric power steering system provides additional steering 
force to reduce the driver effort required to turn the wheel 
particularly whilst parking.

When the vehicle speed increases the assisted power steering 
force is reduced. The system is operated by an electric motor 
therefore do not continually turn the steering wheel while 
stationary.

When turning the steering wheel too fast, you will hear the 
sound of friction, this is normal rather than a failure, if necessary, 
consult Dongfeng authorised service outlets for inspection.

When the engine is running and the electric power steering 

system EPS warning light flashes, this indicates the steering 

system is not working properly and the vehicle should be 
examined by an authorised DFSK service centre.

Braking System

The braking process is through brake and tyre friction with the 
ground which reduces the speed. 

If the vehicle isn’t used for an extended period, some surface 
corrosion may build up on the friction surfaces. This may cause 

noise when the brakes are applied for the first time and should 

stop after a few applications of the brakes. If the noise persists 
take the vehicle to your nearest DFSK Service Centre.

To avoid affecting the pedal travel, do not lay a thick carpet 
under the brake pedal.

Vacuum assisted braking

The brake booster uses the vacuum of the engine to assist 
braking. If the engine is stalled or the drive belt is broken, you 
can still stop the vehicle with the brake pedal pressed down, but 
you will require extra force on the pedal and there will be an 
increase in the braking distance.

If the vehicle is moving, with the engine off, the auxiliary brake 

will not work, and the braking becomes more difficult.

 Note 

Continuous braking may result in increased brake pedal force 
required when the vehicle is driving in high altitudes.

!

 Warning

Do not allow the vehicle to coast when the engine is switched 
off.

50

Start up and driving

Summary of Contents for DFSK Glory 580
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands