SOCOMEC - Réf.: 678 623 G GB
43
ENGL
ISH
BASIC PRODUCT USE (continued)
Software version is displayed on the
unit after reset (powering up action after
3 minutes power off to discharge the
unit).
Software version
{
{
Version Number
Product Programming is possible in
Automatic Mode in position 1 when the
Mains Source is available, or in Manual
mode.
It is not accessible when a test or an
automatic sequence is activated.
Programming mode is accessible by
pressing and holding the validation push-
button for 5 seconds and then entering
the code 1000:
Product Programming
Before first product use,
access programming mode
and verify product
programming parameters.
PROGRAMMING ACCESS
To exit the Programming and come
back to visualisation mode, hold the
validation pushbutton for 5 seconds.
Parameters saved permanently
once exit.
PROGRAMMING EXIT
Press for 5 seconds
Press once to display 1
Validate
Access to programming Menus
ATI 068 A GB
ATI 070 A
