Socket Bluetooth iPAQ User Manual Download Page 40

Page: 40 / 114

Connect!Agent will turn on the

Bluetooth

radio and begin to search for

and connect to the

Bluetooth

CHS.

If this is your first time connecting to a

Bluetooth

CHS from this

device, Connect!Agent will search for any

Bluetooth

CHS in range.

If you have previously connected to a

Bluetooth

CHS, Connect!Agent

will automatically search for your favorite (default) device.

If Connect!Agent does not have a favorite barcode scanner, select the one
you want to connect to and tap

Note: To help you identify the scanner, Connect!Agent reports the
Bluetooth Device Address, which is labeled inside the battery
compartment for the Bluetooth

CHS v2. The characters in brackets are the

last six characters of the address.

Connect!Agent will begin connecting to the

Bluetooth

CHS.

Summary of Contents for Bluetooth iPAQ



















































































































Search results

Summary of Contents for Bluetooth iPAQ

Reviews:

Related manuals for Bluetooth iPAQ

Brands by name

Popular brands

Socket Bluetooth iPAQ, User Manual

Search results

Summary of Contents for Bluetooth iPAQ

Reviews:

Related manuals for Bluetooth iPAQ

Brands by name

Popular brands