CHAPTER 4: SETUP FOR THE SOMO 650
47
4.
Tap on the CS HW tab. Enter the following settings:
•
Good Read Indicator:
Select how you would like the
Bluetooth
CHS
to indicate that it has successfully read data.
•
Battery Level
: When the
Bluetooth
CHS is connected, a progress bar
displays this advanced feature.
•
Disable Auto Power Off mode:
3
CAUTION: Selecting this option will disable the Auto Power Off
mode and can result in complete discharge of the
Bluetooth
CHS
batteries. Use with caution.
•
Advanced
: When the
scanner
is connected, the
Advanced
button
appears. If desired, tap to configure advanced settings (
configurable only
with the Bluetooth
CHS v2).
−
Good Read Indicator from the host
: Select how you would like
the
Bluetooth
CHS to indicate that the mobile device has received
the scanned barcode data.
−
Trigger lock out
: Select how long you would like the
Bluetooth
CHS to disable the trigger until data from the previously scanned
barcode reaches the mobile device.
−
Permanent Pair
: Please refer to the ActivePairing section on the
next page for instructions.
−
Tap
OK
.
5.
Tap
ok
.
