CHAPTER 4: SETUP FOR THE SOMO 650
41
6.
After the devices connect, the
Bluetooth
CHS will beep
once. The SocketScan icon at the bottom of the Today
screen will change into a scanner icon to indicate the
connection.
Note: Connect!Agent will save data to automate future connections
to your Bluetooth
CHS. To change the favorite scanner, use the
Connect!Agent utility (see instructions at the end of this chapter)
SCENARIO 2:
After the SoMo connects to the scanner, you can set up a Permanent Pair.
1.
Complete the steps described above for Scenario 1.
2.
While the scanner is connected to the computer, tap on the
SocketScan icon. In the menu, tap Settings.
3.
In the
CS HW
tab, tap
Advanced
. Check the box
Permanent Pair
. Tap
OK
. Tap
ok
to save.
Note: After you set up the Permanent Pair, future connections can be initiated
by simply powering on the scanner. SocketScan must be running on the SoMo.
