56
STEP
6:
T
URN ON THE
B
LUETOOTH
CHS
Press and hold the small power button for 3 seconds
, until the LED
turns blue and the scanner beeps twice (low - high).
The LED should blink blue once every second to show that the
Bluetooth
radio is on but not connected.
Note: The following Bluetooth mode sequence is for the Bluetooth
CHS v2.
Time after turning on scanner
Bluetooth
mode
0-5 minutes
Discoverable and connectable
5-20 minutes
Connectable
20 minutes
Scanner automatically powers off
STEP
7:
P
REPARE THE
C
ONNECTION
SCENARIO 1:
1.
Tap on the SocketScan icon
at the bottom of the screen. In the menu,
tap
Connect CS
.
Note: The
Connect CS
option appears after cordless scanner support. is
enabled.
2.
If the
Bluetooth
radio of your device is turned off, Connect!Agent will ask
if you want to turn it on. Tap
Yes
.
