Page
SD1012 Installation Manual - Issue 6, Rev 1
S&W Production & Post Production
iv
Power cable supplied for the USA
The equipment is shipped with a power cord with a standard IEC molded free socket on one end
and a standard 3-pin plug on the other. If you are required to remove the molded mains supply
plug, dispose of the plug immediately in a safe manner. The color code for the lead is as follows:
GREEN lead connected to E
(Protective Earth Conductor)
WHITE lead connected to N
(Neutral Conductor)
BLACK lead connected to L
(Live Conductor)
Power cable supplied for countries other than the USA
The equipment is shipped with a power cable with a standard IEC moulded free socket on one end
and a standard IEC moulded plug on the other. If you are required to remove the moulded mains
supply plug, dispose of the plug immediately in a safe manner. The colour code for the lead is as
follows:
GREEN/YELLOW lead connected to E
(Protective Earth Conductor)
BLUE lead connected to N
(Neutral Conductor)
BROWN lead connected to L
(Live Conductor)
Free Socket
Free Plug
Control Panel Power cable tie
A cable tie mount is located by the power inlet
on the control panel. A cable tie may be used
to fix the power cable to the unit to prevent
accidental disconnection of power.
If this facility is used allow enough cable after
the tie to allow the power plug to be easily
removed from and inserted into the power
socket.
Min length after tie = 20mm
Cable tie
mount
Cable tie
I O
Summary of Contents for SD1012
Page 1: ...INSTALLATION MANUAL SD1012...