S&W Production & Post Production
SD1012 Installation Manual - Issue 6, Rev 1
Page 25
CONTROL PORTS AND PROTOCOLS -
continued
Programming The Outputs
The GPO functions are programmed in the GPO menu which
is accessed from the GPI menu by F1R.
The rotary controls are used to set the parameters.
Conditions
The leftmost control (GPO) selects the GPO, the next one
(GPO Class) selects the “occurrence group” and GPO Mode
selects the actual occurrence.
If T/L User Bits is set as the GPO Class, F3L “User Bit” selects
the actual bit (1 to 6) to be flagged.
The rotary control “Pulse Width” determines the time that the
output relay is activated.
Active State
The active state of the output relay may be set as “Closed” or
“Open” by F4L (Relay) which toggles between open and
closed.
Summary of Contents for SD1012
Page 1: ...INSTALLATION MANUAL SD1012...
