S&W Production & Post Production
SD1012 Installation Manual - Issue 6, Rev 1
Page 21
CONTROL PORTS AND PROTOCOLS -
continued
S & W Tally
This protocol transmits detailed tally information every field for use by external intelligent tally
systems. The protocol used is specific to Snell & Wilcox, and details are available on request.
S & W
Router
For use with Snell & Wilcox HD1132 router (part of the HD1024 and HD2524 systems). The
"NoAux"
variant disallows control of the router's aux busses, so that these can be controlled by an
external device.
Aux 1 to Aux 4 & Aux Selectable
Allows remote source allocation of the Aux outputs using a Quartz remote panel.
Probel TX320 & DVE
These are proprietary protocols.
BBC Camera
This is a proprietary protocol for use with virtual studio software.
Button Bus
The address code of the pressed control panel button is sent from the applicable port.
P-Bus
Allows up to 32 RS-485 devices to be strung off a port and triggered independently.
Summary of Contents for SD1012
Page 1: ...INSTALLATION MANUAL SD1012...
