S&W Production & Post Production
SD1012 Installation Manual - Issue 6, Rev 1
Page 3
INTRODUCTION
These installation instructions provide a guide to the installation of the SD1012 Switcher.
ON DELIVERY OF THE SYSTEM
The equipment is supplied in dedicated packaging provided by the manufacturer and should not be
accepted if delivered in inferior or unauthorised materials.
Carefully unpack the system components and check them against the packing list. If there is
anything incorrect, notify your dealer or Snell and Wilcox directly at once.
Check that the equipment has not been damaged in transit. If any damage has occurred, notify
your dealer or Snell and Wilcox directly at once as well as the carrier.
Always retain the original packing materials if possible, they could prove useful should it ever be
necessary to transport or ship the system units.
The system components are:
•
SD1000 Switcher Mainframe
•
CP1012 Control Panel
•
LCD Touch Screen module
•
25-way D-type cable to link Control Panel and LCD Touch Screen module
•
9-way D-type cable to link Control Panel and LCD Touch Screen module
•
10 Base-T cable to link Control Panel and Switcher Mainframe
•
User manual.
Summary of Contents for SD1012
Page 1: ...INSTALLATION MANUAL SD1012...
