![background image](http://html.mh-extra.com/html/snell-and-wilcox/sd1012/sd1012_installation-manual_1309064030.webp)
Page
SD1012 Installation Manual - Issue 6, Rev 1
S&W Production & Post Production
22
CONTROL PORTS AND PROTOCOLS -
continued
GENERAL PURPOSE INPUTS & OUTPUTS
Overview
Standard System
The switcher mainframe has eight general purpose inputs and
32 outputs. The action of each of these inputs and outputs
may be allocated by the user from a range of functions. The
allocation is performed in the GPI and GPO menus.
The Inputs
The general purpose inputs are user programmable in the
“Configure - User - GPI” menu.
Each input may be independently set to trigger a function
when an edge or level is applied to the input connector pin.
The menu showing the available GPIs is shown below.
Summary of Contents for SD1012
Page 1: ...INSTALLATION MANUAL SD1012...