![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd5050/hd5050_operators-manual_1309054027.webp)
HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards 4.10
m
OUTPUT
Std
The output standard may be set using this function.
Selections available are:
1080i/60
1080i/59.94
1080i/50
1035i/60
1035i/59.94
720P/60
720P/59.94
1080SF/23.98
1080SF/24
480P/60
480P/59.94
Model Variations
HD5050
All standards shown
HD5050i
1080 and 1035 only
HD5050P
720P and 480P only
Note that the 480P/60 and 480P/59.94 outputs are
contained within 1080i/60 and 1080i/59.94 rasters
respectively. The active picture is placed at the top
left-hand corner of the 1080I raster.
As there is currently no formal specification for
these standards it is possible that the format of
these standards could change in the future.
Blank
Output blanking widths may be adjusted with these
controls. Adjustments to the left, right, top and
bottom of the picture may be made in steps of
output samples/lines.
This function is used where it is required that the
output be active on more than a certain range of
output lines.
For example it is possible to impose an artificial
letterbox by bringing the top output blanking down
the screen and the bottom output blanking up the
screen.
Preset values vary with the output standard.
Left
Adjusts the left-hand edge of blanking. 0 equals no
blanking on any output pixels that would normally
be visible. 1 equals blank the first active pixel.
Right
Adjusts the right-hand edge of blanking in steps of
1 pixel
Top
Adjusts the top line of blanking. 0 equals no
blanking on any output lines that would normally be
visible, 1 equals blank the first active line, etc.
Bottom
Adjusts the bottom line of blanking in steps of
1 line.