![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd5050/hd5050_operators-manual_1309054019.webp)
HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards
4.2
+'
KRPH
EDFN
SUHVHW
GENERAL OPERATING INFORMATION
Display Window
The control window displays all selection menus
sub-menus and unit status information.
Pressing the button adjacent to the required item
makes a selection; this will become highlighted
(reversed text) when active.
Pressing the Home
r
button will display the
home status screen in the display window from any
position in the menu hierarchy.
It will display the current system set-up (showing
the type, conversion mode and status of input and
output signals) and also two lists of functions that
may be accessed by pressing the adjacent buttons.
Note that all these functions may also be accessed
by pressing the relevant dedicated push button; the
button will become illuminated when the function
has been selected from either the menu or the
push button.
Home Display
An example of unit status is shown below indicating
that the unit is set to accept an 625 SDI/D1 input
signal and the output signal is selected to be
1125/60
This example indicates that the unit has no input,
Reference A is selected, output signal is
1125/59.94, full height and in freeze mode.
Warnings
A flashing cursor in the top right-hand corner of a
function box (the Input box in the example above)
indicates that a function has been adjusted away
from the preset value.
If an input is not available the word No Input will
be displayed and the output picture will
automatically freeze or go to black depending on
the Input Loss setting.
(See Loss on page 4.5)
Display Window