![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd5050/hd5050_operators-manual_1309054040.webp)
HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards 4.23
OPERATING THE HD5050 FROM AN ACTIVE CONTROL PANEL VIA THE ROLLCALL REMOTE CONTROL
SYSTEM
The Menu System
(See Menu system diagram on previous page)
All operational parameters and selections are
made using a system of menus displayed in two
LCD windows.
Menus are selected by push buttons adjacent to
the display windows and further menu selections
made by rotating a spinwheel and pressing a push
button.
The spinwheel also allows continuously variable
parameters, (where applicable) to be adjusted and
the settings seen in the LCD window.
Various specific operations may be achieved by
operating dedicated push buttons.
The system may be considered structured as a set
of menus and sub-menus which are displayed in
the windows. The windows will display the current
status of the controlled module and other
information messages. (e.g. error comments,
warnings etc.) and the names of the lower-level
menus which may be scrolled through using the
spinwheel.
A new menu may be selected by pressing the
appropriate dedicated function button.
For specific operational details of the active
front panel consult the operating manual
supplied with the active front panel.
The menu items shown on the system diagram will
have the same functions and ranges as those
displayed on the main unit front panel.
For details please consult the descriptions of the
functions on pages 4.4 to 4.21.
Note that the items shaded will be seen in the
display window but will not be selectable.