![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd5050/hd5050_operators-manual_1309054044.webp)
HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards 4.27
Display and Display Controls
The display comprises three rows of 20 characters;
the top row normally shows the current conversion,
the centre row shows the genlock status and the
bottom row shows other selected conditions.
There is a selection pushbutton at both ends of
each row. In some cases the row has information
on one parameter, in which case the button at
either end can be used for selection.
In other cases, there are two parameters in the
row, in which case the left-hand pushbutton selects
the left-hand parameter and the right-hand button
the right-hand parameter. An item with further
options to select is indicated by at the right-hand
end of the display.
The rotary control allows you to scroll menus and
to set parameters to a required value. The
illuminated arrows indicate the direction options
that you have.
To return to the previous menu level, press the
back pushbutton. It may be used to progress back
up the menu tree. To return to the status display,
press the button labelled home.
To return a value you have just changed to its
preset value press preset. To return all the values
on the display that you have changed, press home
and preset simultaneously.
home
preset
back