![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd5050/hd5050_operators-manual_1309054034.webp)
HD5050
SECTION 4
HD5050070999 Version 1 Issue 4
For Software Version Z5 onwards 4.17
Freeze
The output picture will be frozen.
FrzType
This selection allows the type of freeze to be
selected.
Selections available are:
Frame freeze
Field 1 freeze
Field 2 freeze
Note that these selections will
not be available for progressive
output standards
Preset is to Frame
m
CONFIG
Version
Selecting Version will display details of the
software version.
Audio
This function will be remote controlled via the
Snell
&
Wilcox RollTrack video/audio tracking
system.
This function allows the value of the delay time
produced by this module to be sent, via the
RollCall™ network, to audio delay units connected
on the same network. This enables compatible
audio delay units to produce an audio delay
dependent on this and other similar units. The
audio delay unit will dynamically follow or track the
received delay-time information allowing processed
video signals to be timed correctly with audio
signals. This automatic tracking system via the
RollCall™ network is call RollTrack.
For more detailed information, see the RollTrack
section (Appendix) at the end of this manual.
The destination for the delay information is set by
the network code address as follows:
Selecting R-Trk provides a sub-menu that allows
up to 8 audio delays to be selected as a
destination.
A further sub-menu then appears to allow the code
to be set up (using the spinwheels below) to edit
the text.
The full network address has five sets of numbers.