Vega 30 Router User Manual
Defining User-defined Sources
Vega 30 Web Interface 6.5
Issue1 Revision 1
Page 73
© 2017 SAM
If no message appears, then check the spellings of channel source names.
6.5.3.7
Defining ‘Null Source’ for a Channel Source
For each user-defined source, video and audio channels may be defined for a source. A blank
entry in the Source Names web page means ‘null source’ for that channel source.
For ‘null source’, no routing is done on that channel, so there will be no change on that
corresponding channel at the routed destination.
If no video or audio source is required in a source’s video or audio channel,
then:
•
Enter a blank in the
Source Names
table.
Remember to click
Apply
at the top of the
Source Names
Web page to apply changes made
.
Figure 54 ‘Null Source’ Entries
Note:
Partial Sources:
Sources with ‘null sources’ in them are called partial sources.
When routing a partial source to a destination, the end result depends on what was routed
there previously. Tallies will indicate the last source routed to the destination, whether it
was partial or not.
