Vega 30 Router User Manual
Initial Powering and Starting Up
Getting Started 11.2
Issue1 Revision 1
Page 196
© 2017 SAM
5.
If the front LEDs indicate another condition,
first refer to Section 4.4 “Front Panel Status Indicators” on page 33 for full information
on all LED states.
If required, contact your local SAM representative for further support. Contact details
can be found by visiting
www.s-a-m.com/support/247-support-contact-details
.
11.2.1 Disconnecting Power to Vega 30
When a Vega 30 Router has to be powered down, carry out the following procedure:
1.
Disconnect both external Vega 30 PSU’s from AC mains supplies.
2.
Disconnect both DC power cables from the rear of the Vega 30 Router.
Figure 142 Front System LED Flashes Blue while upgrading.
(Example is for Vega 30 fitted with two PSUs)
a) Vega 30 Router starting up.
b) Vega 30 Router started OK.
c) Vega 30 Router no Ethernet.
(For the full description of all Vega 30 Router front LED states,
see Section 4.4 “Front Panel Status Indicators” on page 33.)
