Vega 30 Router User Manual
Monitoring a Router Input and Output
Routing Use Cases 10.5
Issue1 Revision 1
Page 178
© 2017 SAM
Example:
To monitor a stereo pair of a router video output:
•
De-embed audio channels 1 and 2 of video
output
3
(audio channel sources 33 and 34 of video output 3);
and
•
Route these to audio channels 5 and 6 of MADI output 4 for monitoring
(audio channel destinations 741 and 742, destination port 47).
(See Table 61 in Appendix B on page 247 for port numbering.
See Table 63 in Appendix C on page 250 for audio channel source/destination numbers.)
Direct Video routing:
•
Use RollCall Direct Audio routing XY panel to make the routing:
•
‘Destination 741 from channel source 33’.
•
‘Destination 742 from channel source 34’.
Pre-defined video sources and destinations:
•
Create a user-defined source (for example, ‘
MySrc 51
’ below) containing the
monitored stereo pair in audio channels 5 and 6 and ‘null sources’ in other channels:
•
Use either the RollCall ‘
Assoc Routing
’ XY panel or the Web ‘
Set Routes
’ page to
make the routing:
•
‘Destination 47 from Source 51’.
The stereo audio channels from the router output 3 allow the user to listen to channels 1
and 2 of
whichever
video signal is routed to router output 3.
Licenses required:
•
Video I/O options, as required.
•
Audio routing option, VG10-AR.
Routing:
•
Association routing. Use:
•
Pre-defined video sources and destinations.
•
User-defined audio sources and partial sources.
•
Direct Routing.
User-defined
Source
Video
Source
Audio Channel Sources
No.
Name
Vid.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
51
MySrc 51
-
-
-
-
-
33
34
-
-
-
-
-
-
-
-
-
-
