Vega 30 Router User Manual
Source Configuration Template
Vega 30 RollCall Templates 7.4
Issue1 Revision 1
Page 119
© 2017 SAM
7.4.3 Defining User-defined Sources on the Source Configuration Template
The first 46 table rows show pre-defined
Sources
. These are
for the physical video input
ports and MADI input ports. (I.e. 34 pre-defined
Sources
for video inputs and 12 predefined
Sources
to cover the three MADI 64-channel inputs - four pre-defined sources per MADI
input port.) These rows are not editable; the text in these rows is colored grey.
The remaining 454 rows are for user-defined sources. These comprise up to one video
source and up to 16 audio channel sources and are editable. (The
Source Name
is not
editable in this screen.)
To define a user-defined
Source
:
1.
In the table row for the source to be defined,
enter a video source name or number.
(Enter ‘0’ for no video source in the user-defined
Source
.)
While text is being typed, the text color is blue.
Press
enter
on the keyboard to enter the channel source name or number.
If the entered value is not a recognized channel source name or number, a warning
dialog is displayed.
2.
Enter an audio channel source name or number.
(Enter ‘0’ for no audio channel.)
Press
enter
on the keyboard to enter the channel source name or number.
3.
Fill out the audio channels as required.
In the RollCall screens, a zero (‘0’) or hyphens (‘---’) in the channel source column means ‘null
source’. (In the Web interface screens ‘null source’ is a blank entry.)
When a
Source
is routed to a destination, any channel in the
Source
that is set to ‘null
source’ does not change the corresponding channel at the destination.
See Section 9 “Sources and Destinations” on page 162 for more information about defining
sources.
