Vega 30 Router User Manual
File listing: Vega30Router.mib
SNMP MIB Files for the Vega 30 Router D.4
Issue1 Revision 1
Page 268
© 2017 SAM
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[Network/UNIpPriDnsAddress]] The primary DNS Address of the
Router"
::= { unitNetwork 4 }
unitSecDNSAddress OBJECT-TYPE
SYNTAXIpAddress
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[Network/UNIpSecDnsAddress]] The secondary DNS Address of the
Router"
::= { unitNetwork 5 }
-- Vega 30 PSU usage
psu OBJECT IDENTIFIER ::= { routerConfig 4 }
psuNumber OBJECT-TYPE
SYNTAXUnsigned32 { both(0), psu1Only(1), psu2Only(2)}
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[PSU/Number]] This object indicates which of the PSUs are
connected to the router"
::= { psu 1 }
-- Vega 30 Control Protocol Settings
protcolSettings OBJECT IDENTIFIER ::= { routerConfig 5 }
-- General Switcher (SW-P-02) settings
swp02GeneralSwitcher OBJECT IDENTIFIER ::= { protcolSettings 1 }
swp02PortNumber OBJECT-TYPE
SYNTAXUnsigned32
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[SWP02/Port]] This Port number used for protocol clients"
::= { swp02GeneralSwitcher 1 }
swp02Enable OBJECT-TYPE
SYNTAXBooleanFT
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[SWP02/Enable]] This indicates if the protocol is enabled"
::= { swp02GeneralSwitcher 2 }
-- General Remote (SW-P-08) settings
swp08GeneralRemote OBJECT IDENTIFIER ::= { protcolSettings 2 }
swp08PortNumber OBJECT-TYPE
SYNTAXUnsigned32
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[SWP08/Port]] This Port number used for protocol clients"
::= { swp08GeneralRemote 1 }
swp08Enable OBJECT-TYPE
SYNTAXBooleanFT
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[SWP08/Enable]] This indicates if the protocol is enabled"
::= { swp08GeneralRemote 2 }
-- RollCall settings
rollCall OBJECT IDENTIFIER ::= { protcolSettings 3 }
rollCallEnable OBJECT-TYPE
SYNTAXBooleanFT
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[RollCall/Enable]] This indicates if the protocol is enabled"
::= { rollCall 1 }
rollCallSharePortNumber OBJECT-TYPE
SYNTAXUnsigned32
MAX-ACCESSread-write
STATUScurrent
DESCRIPTION"[[RollCall/SharePort]] This Port number used for protocol clients"
::= { rollCall 2 }
rollCallAnyLogServer OBJECT-TYPE
