Snell Advanced Media Vega 30 User Manual Download

Page: 28 / 281

Vega 30 Router User Manual

Router Configuration and Control

Product Overview 3.6

Issue1 Revision 1

Page 28

3.6.2 Protocols

3.6.2.1

SW-P-02 General Switcher Protocol

Supported commands:

•

Connect

•

Interrogate

•

Connect on Go Group Salvo

- New command now supported including Extended

Command.

•

Go Group Salvo

- New command now supported.

•

Extended Protect Interrogate

- New command now supported.

•

Extended Protect Tally Dump Request

- New command now supported.

•

Protected Device Name Request

- New command now supported.

Eight simultaneous clients.

3.6.2.2

SW-P-08 General Remote Protocol

Supported commands:

•

Connect

- Now supports Extended command.

•

Interrogate

- now supports Extended command.

•

Protect Connect

- Now supports Extended Commands..

•

Protect Interrogate

- Now supports Extended command.

•

Protect Disconnect

- Now supports Extended Commands.

•

Protect Tally Dump

•

Device Name Request

•

Tally Dump Request

•

Connect on Go Group Salvo

- Now supports Extended Commands.

•

Go Group Salvo

•

Enquire Connect

- Now supports Extended Commands.

•

Protect Tally Dump Request

- Now supports Extended Commands.

•

Tally Dump Request

- Now Supports Extended commands.

•

All Source Names Request

- New command supported includes Extended

Command option.

•

All Destination Association Names Request

- New command supported includes

Extended Command option.

•

All Source Association Names Request

- New command now supported.

Eight simultaneous clients.

3.6.2.3

SNMP

•

Traps with support for 10 servers.

•

MIB Browse/Walk.

•

Route Setting.

•

PSU fail, Fan fail.

Mib files are outlined in Appendix D “SNMP MIB Files for the Vega 30 Router” on page 257.

Summary of Contents for Vega 30


























































































































































































































































































Search results

Summary of Contents for Vega 30

Reviews:

Related manuals for Vega 30

Brands by name

Popular brands

Snell Advanced Media Vega 30, User Manual

Search results

Summary of Contents for Vega 30

Reviews:

Related manuals for Vega 30

Brands by name

Popular brands