Vega 30 Router User Manual
Port Configuration Template
Vega 30 RollCall Templates 7.5
Issue1 Revision 1
Page 126
© 2017 SAM
Pixel Offset
Slider.
Adjust number of extra pixels offset from the Vega 30’s internal
video reference timing for the output.
The setting, with the Line offset setting, acts to delay the output
overall. This overall delay sets when the video switching occurs
with respect to video reference timing for the output to switch
cleanly
Value adjustment range: 0 to 4095 pixels.
See
Slider Control Note
below for general slider usage.
See
Note 1
and
Note 2
.
Reference
Offset
Read-only.
Displays the measured time between an output signal and the
reference signal. The value is in pixels (video samples).
The output may be advanced or retarded by changing the
Lines
and
Pixels
offset controls.
The
OutputReferenceOffset
value:
•
Positive integer:
Input arrives ahead of the reference.
•
Zero:
Input arrives at the same time as the reference.
•
Negative integer:
Input arrives later than the reference.
See
Note 1
.
Note 1:
See Section 6 “Output Video Timing - Line Sync and Offset” on
page 45 for more information on the
Line Sync Enable
,
Line
Offset
,
Pixel Offset
and
Reference Offset
controls.
Note 2:
Settings available with options VG10-CSx.
Note:
Slider
Control Note
: General slider usage to adjust a value:
•
Click on the number adjacent to the slider to enter a number directly.
Press <return> to enter the value.
•
Click on the slider for coarse jumps.
•
Drag the slider knob to change the value.
•
Click on the slider knob to select it select it.
Use the left-/right-arrow keys (“<“, “>”) for fine changes.
Item
Description
Table 39
Output Ports Configuration (Continued)
