Vega 30 Router User Manual
Comms Setup Template
Vega 30 RollCall Templates 7.6
Issue1 Revision 1
Page 131
© 2017 SAM
7.6.4
Comms Setup -
SNMP
Figure 94 Comms Setup - SNMP Items
Item
Description
Enable
Check box.
Tick to enable the SNMP protocol interface.
Communities:
(SNMP name fields for Get, Set and Trap commands/messages.)
Get
Text box.
Enter privacy setting for SNMP Community read-only string.
Typically set to “public”.
See
Note 1
.
Set
Text box.
Enter privacy setting for SNMP Community read-write string.
Typically set to “Private”.
See
Note 1
.
Trap
Text box.
Enter SNMP Community Trap string.
See
Note 1
.
Trap Addresses:
Several entry items:
Text box.
Enter IP Address to send trap message to.
See
Note 1
.
Note 1: “S” and “P” buttons -
After entering information in each text box, always
click on the adjacent “
S”
button
or press “
return”
to locally
save
the new setting.
(Note: Clicking on the “
P”
button will return the setting to its
preset
default value).
Table 43
Comms Setup - SNMP Items
