Vega 30 Router User Manual
Defining User-defined Sources
Vega 30 Web Interface 6.5
Issue1 Revision 1
Page 64
© 2017 SAM
6.5 Defining User-defined Sources
User-defined sources are defined in the
Source Names
table of the
Source Names
web
page.
Sources 47 to 500:
(Table rows 47 to 500, user-defined sources.)
These are user-defined sources. The user can determine which video and audio input
channels are used together as a source and can be routed together to a destination.
A user-defined source is defined in a row of the table. Names of each video and audio
channel of the user-defined source are entered.
6.5.1 User-defined Source - Defining a Source Name
User-defined sources are in rows 47 to 500.
To define a user name for a user-defined source:
1.
Enter a 32-character name and an 8 character name in the respective columns for the
source row.
2.
Click
Apply
at the top of the
Source Names
Web page
to apply changes.
This simply renames the user-defined source with a user-defined name.
Alternatively, source names can be imported via a spreadsheet. See Section 6.5.4 “Importing
and Exporting Source and Destination Names” on page 74.
Note:
The video and audio channels associated with this source also require defining.
(See “User-defined Source - Defining an Associated Video Source” on page 65
and “User-defined Source - Entering Audio Channel Source Names” on page 68.)
Note:
Editing Source Names:
Source names can be edited either:
•
in the Vega 30 Web page,
•
or in the RollCall template screen,
•
or in the RollCall XY Panel.
•
or the
entire
set of source and destination names can be imported. (See Section
6.5.4 “Importing and Exporting Source and Destination Names” on page 74.)
