3
EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
English (original instructions)
loading or unloading.
Weight limit: 220 lbs (100kg) on level
cement surfaces — overloading may
cause injury and could permanently
damage unit.
Only load with as much weight as you
can control when machine is moving.
Never carry passengers.
Use only Briggs & Stratton batteries.
Do not use if forward/backward button
or power switch or safety button is not
working properly.
Use caution when operating in wet
conditions.
Do not operate in explosive atmospheres
such as in the presence of flammable
liquids, gasses or flammable dust. If
in doubt, wait for dust to settle before
using.
Be sure the area is clear of other people
before moving. Do not allow children,
bystanders, or pets in your work area
when your utility cart is being moved.
Do not charge appliance in rain, or in
wet locations.
Remove or disconnect battery before
servicing, cleaning.
Use only the following type and size
battery(ies): BSB2AH82 (2 amp-hour) or
BSB4AH82 (4 amp-hour) or BSB5AH82
(5 amp-hour) and Briggs & Stratton
charger BSRC82 or BSSC82.
Do not dispose of the battery(ies) in a
fire. The cell may explode. Check with
local codes for possible special disposal
instructions.
Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and
may cause damage to the eyes or skin.
It may be toxic if swallowed.
Exercise care in handling batteries
in order not to short the battery with
conducting materials such as rings,
bracelets, and keys. The battery or
conductor may overheat and cause
burns.
Dress Properly - Do not wear loose
clothing or jewelry. They can be caught in
moving parts. Use of rubber gloves and
substantial footwear is recommended
when working outdoors. Wear protective
hair covering to contain long hair.
Use Safety Glasses.
Don't Force Appliance - It will do the
job better and with less likelihood of a
risk of injury at the rate for which it was
designed.
Store Idle Appliance Indoors - When
not in use, appliances should be stored
indoors in dry or lockedup place - out of
reach of children.
Check Damaged Parts - Before further
use of the appliance, a guard or other
part that is damaged should be carefully
checked to determine that it will operate
properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage
of parts, mounting, and any other
condition that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service center unless
indicated elsewhere in this manual.
Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of
a second.
Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and control
of the tool in unexpected situations.
Not
for
Reproduction
