TRAK MODEL 9100 MODULAR FREQUENCY/TIME SYSTEM
3-21
TM4400013
Rev
D
Set/Request receiver unlock time-out delay
-
This command provides a user settable time out that will mask an unlock (holdover) condition from causing a
GPS REF module failure until the time out elapses. The time out is set in hours and days and if the STI is
requested while the GPS REF module is locked, the response will contain the user setting. However, if the GPS
REF module is in holdover, the STI responds with the user set timeout and the current minutes, hours and days
left for the timeout to elapse. If the timeout elapses, the GPS REF module will indicate a failure.
Request
mode:
Host
sends:
X.STI<CR>
9100 replies:
X.STI dd:hh<CR><LF> (if in non-holdover mode)
X.STI dd:hh DD:HH:MM <CR><LF> (if in holdover mode, elapsed time of
holdover)
Where:
dd is the time-out in days, user set time out
hh is the time-out in hours, user set time out
DD is the number of days left before timeout elapses if in holdover
HH is the number of hours left before the timeout elapses if in holdover
MM is the time out in minutes left before the timeout elapses if in holdover
X is described on command summary page
Set
mode:
Host sends:
X.STI dd:hh <CR>
9100
replies:
X.STI
DONE<CR><LF>
Where:
Same as for STI request mode
