TRAK 9200 MODULAR FREQUENCY/TIME SYSTEM
TM4400013
REV.
D
2-4
2-6
DISTRIBUTION MODULE SWITCH and CONFIGURATION JUMPER SETTINGS
The Model 9200 accepts both the Model 9106 DDM and the 9111 TEL modules. Either module types may be
installed in any position, A1 – A14. Refer to the Model 9100 technical manual section 2-8 for DDM and TEL
module configurations.
2-6-1
TERMINATOR and FAULT LOGIC (TFL), (A15, A16)
The Model 9250 TFL is installed in position A15.
The TFL/DDU address switch, S2, must be set so that the Model 9100, FSU “knows” the address of the DDU.
Set S2 for 0 for a single DDU, 1 for two DDU’s, etc.
Note: Actual TFL address is not important as insuring that no two Model 9200, that are connected to the same
Model 9100, have the same address.
Figure 2-2. TFL Switch Location
S2
Address
TFL
