Smirnov Electronics | WhammyD 2 | User Manual
30 © 2013 SMIRNOV ELECTRONICS
10.
IMPORTANT:
In the
Switch
necessarily
value should be set
Fixed
. This means that
the pedal is handle this step programming,
not as a note arpeggios, but as a fixed
threshold. Check it before going to the
next step.
Both steps are necessary values with fixed
shifts programmed, but to limit the length
preset two steps, in step No. 3, we need to
put a marker
Loop
.
11.
Direct the marker on the
Step
and proceed
to the next step (Step No.
3
).
12.
In the
Switch
exhibiting value
Loop
, and
limit the length than the preset 2 steps.
The rest of the fields for marker
Loop
not
important.
13.
Preset with the desired fixed shifts
programmed. Now you just need to keep it
in long-‐term memory -‐ storage WhammyD
2 presets. For this exit the programming
mode -‐ simultaneously press and Hold for
1.5 -‐ 2 seconds buttons
A
and
B
.
