Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 21
6.3 Changing the tempo to MIDI Clock.
When used with WhammyD 2 external MIDI -‐ sequencer, which can clocked attached
devices standard Real -‐ Time Messaging MIDI Clock, your WhammyD 2 itself will determine
the current tempo, and automatically switches to
Slave
.
IMPORTANT:
To see that the pedal is mode Slave
possible if switch full mode display (Paragraph 4.2
of the User Guide)
6.4 Changing the tempo to MIDI CC.
MIDI can also set the tempo in numerical form -‐ standard messages posted via CC5 or CC6.
Since the maximum value of the number, transmitted in MIDI -‐ CC message is 127, then all
the valid range taken Tempo divided into two sub-‐band.
o
On channel
CC5
you can apply the tempo from 30 to 127 bpm.
o
Data ramp sent via
CC6
, automatically increased by 100. Thus, by passing CC6 data
from 0 to 120, tempo will be from 100 to 220 bpm.