Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 9
Setting Digitech Whammy 5
1.
Unplug the Whammy pedal from the power modules.
2.
Press and hold the Effect On / Off button and plug the Whammy pedal to power.
After the display selection Whammy effect LED lights will turn on signifying the
current MIDI channel release the Effect On / Off button.
3.
Turn the Selector knob, until the light signifying the LED corresponding to plate
é
5TH
é
6TH.
4.
Press Effect On / Off button to exit the MIDI -‐ channel setup menu.
Setting Digitech Whammy DT
1.
Unplug the Whammy pedal from the power modules.
2.
Press and hold the Effect On / Off button and plug the Whammy pedal to power.
After the display selection Whammy effect LED lights will turn on signifying the
current MIDI channel release the Effect On / Off button.
3.
Turn the Selector knob, until the light signifying the LED corresponding to plate
ê
4TH
ê
3RD.
4.
Press Effect On / Off button to exit the MIDI -‐ channel setup menu.
3.3 Switching ON and OFF WhammyD 2
You might have already noticed that there is no power on/off toggle on WhammyD 2, as it
controls the power consumption itself.
Turning ON
To switch WhammyD 2 on press either Button A or B
or both. If you have connected battery and / or an
external power supply correctly, LCD-‐screen will
turn on showing the pedal -‐ load indicator. Once you
see the greeting, release the buttons A and B. After
the pedal is fully loaded if the tumblers are set into
the upper position, you will the following image
(Value preset number and step number canvary).