Smirnov Electronics | WhammyD 2 | User Manual
28 © 2013 SMIRNOV ELECTRONICS
Also in the field
Shift
may have special meanings:
o
Max
-‐ corresponds to the maximum possible shift in the selected Digitech
Whammy preset
o
Noise
-‐ always corresponds to a randomly chosen position of the pedal
expression
o
Random
-‐ always corresponds to a randomly selected number of semitones
to shift possible in the selected preset Digitech Whammy
o
NOP
-‐ matches only preset change on Digitech Whammy selected in the
current step, the position of the expression pedal at the same time value is
transmitted.
For modes with fixed shifts of the most widely used these options can be value
Max
.
As for
Random
and
Noise
-‐ they are too specific, even for modes
Arpeggio
, for which
most cases are designed so that they shift to a fixed extremely maloprimenimy but
possible. Exhibiting values
NOP
mode fixed shifts will only lead to the fact that you
get to switch Digitech Whammy preset without changing the position of the
expression pedal, as in Mode
Footswitch
.
4.
Despite the fact that the field
Duration
can be any value, recommended value of
this field -‐
1/32
.
5.
IMPORTANT:
In the
Switch
necessarily
value should be set
Fixed
. This means that
the pedal is! handle this step
programming, not as a note arpeggios, but
as a fixed threshold. Check it before going
to the next step.
