Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 17
IMPORTANT:
When
THRU -‐ bypass mod
for Digitech Whammy IV is on, the logic of button
A
will be changed. A screen with the included pedal
THRU -‐ bypass mod for
Digitech Whammy
IV on is shown below.
o
Button
A
will turn on/off Whammy -‐ effect. Thus, in order to turn on/off Whammy
you will need to press this button, not the Effect button located on the Digitech
Whammy IV.
o
Button
B
, as in the previous case -‐ used to switch to the next step of the program.
o
Reverse / Whammy Activity Toggle
is used as in the previous case: it determines
whether Digitech Whammy will be on or off in case of switching between the
presets.
The programming of the customised footswitches will be described further in the manual.
5.3 Operation in fixed shifts
Presets numbered 6 -‐ 10. Their work is sharpened by creating sets of fixed shifts for the
Digitech Whammy. Each of these presets could be customized, allowing to sort cyclic shifts
on any interval that can be done your Digitech Whammy in any convenient order. The
screen looks like this, when these presets are used:
