Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 5
6.
Preset Change Handle
changes presets, allows for manual change of pace (When
holding button B). In the programming menu (and others) can be used as a control
(when holding button B) to select and change data.
7.
Power Socket Power.
Power adapter socket (9 -‐ 12V, AC / AC or AC / DC). DO NOT
USE any power supplies of less than 9V voltage. IMPORTANT! Not recommended to
use batteries simultaneously using 9V DC power supply due to the possibility of
battery discharge to 70-‐80%).
8.
Socket Instrument Input.
Instrument input for усе built-‐in THRU -‐ mod for Digitech
Whammy 4.
9.
Socket To Whammy IN.
Digitech Whammy 4 Instrument Input socket when using
the built-‐in THRU -‐ mod for Digitech Whammy 4.
10.
Socket From Whammy Wet Added.
Digitech Whammy 4 Wet Added Out output
spcket with the built-‐in THRU -‐ mod for Digitech Whammy 4.
11.
Socket To Amplifier.
Used to connect pedal jack with an amplifier (or to further
effects chain) using the built-‐in THRU -‐ mod for Digitech Whammy 4.
12.
Whammy MIDI.
Socket for MIDI -‐ cable to the input of Digitech Whammy 4/5/DT.
13.
MIDI OUT / THRU.
Input port for connecting other MIDI -‐ interface to pedal. To
synchronize with Smirnov Electronics Stompbox you must connect this port with the
input of MIDI -‐ interface on your Mac.
14.
MIDI IN.
Port used to plug other MIDI-‐interfaces into pedal; to synchronize with
Smirnov Electronics Stompbox you must connect this socket to MIDI -‐ interface
output of your Mac.
15.
Status LED.
LED to visualize the current position of a "virtual" expression pedal
Digitech Whammy. The brighter the light -‐ the more recessed the expression, the
lack of the light indicates that expression pedal is not used.
