Smirnov Electronics | WhammyD 2 | User Manual
6
©
© 2013 SMIRNOV ELECTRONICS
3. Getting started
3.1 Switching
In case if WhammyD 2 is powered by a battery, plug Whammy’s MIDI-‐cable into MIDI-‐port
of Digitech Whammy.
If you wish to use the controller to its full capacity (using THRU-‐bypass mode for DIgitech
Whammy 4 or using MIDI IN and MIDI OUT/THRU to control and synchronise the pedal with
Mac computers or other appliances) use the instruction below to connect the cables
correctly.
Switching WhammyD 2 and Digitech Whammy IV / V / DT without using the THRU-‐mode.
Switching WhammyD 2 and Digitech Whammy IV with using the THRU-‐mode.
AMP
GUITAR
