Smirnov Electronics | WhammyD 2 | User Manual
26 © 2013 SMIRNOV ELECTRONICS
8.
Direct the marker on the menu Step and
proceed to the next step (Step # 3).
9.
In order to enable the pedals to
understand that the program should
loop, we after an extreme step should
insert a special program step -‐ marker
called Loop (if you using all 128 possible
steps program, after the 128th when
NOT -‐ reciprocating motion program
pedal automatically goes to step Number
1). So, go on the
Switch
and exhibiting
value
Loop
.
10.
We programmed our foot switch wherein
only a necessary presets Digitech
Whammy (as basic functionality of the
buttons A retained mode programming,
you can flip through it and check that the
programmed footswitch). Now you just
need save it in the long memory -‐ store
presets WhammyD 2. To do this, exit the
programming mode -‐ simultaneously
press and hold for 1.5 -‐ 2 seconds buttons A and B.
11.
Direct the marker on the YES and press
button A or B. After that, the pedal will
be released in the base mode, preset
persist volatile memory and will be
rebooted.
Programming preset on this completed.