SMC Networks TigerSwitch SMC6948L2, Management Manual

Page: 94 / 166

W
EB
-B
ASED
M
ANAGEMENT
3-12
IP Configuration
Use the IP Configuration screen to set the bootup option,
configure the IP address for the on-board management agent, or
set the number or concurrent Telnet sessions allowed. The screen
shown below is described in the following table.
Parameter Default Description
IP State USER-CONFIG Specifies whether IP functionality is enabled
via manual configuration, or set by Boot
Protocol (BOOTP). Options include:
USER-CONFIG - IP functionality is enabled
based on the default or user specified IP
Configuration. (This is the default setting.)
BOOTP Get IP - IP is enabled but will not
function until a BOOTP reply has been
received. BOOTP requests will be
periodically broadcast by the switch in an
effort to learn its IP address. (BOOTP values
can include the IP address, default gateway,
and subnet mask.)