SMC Networks TigerSwitch SMC6948L2, Management Manual

Page: 42 / 166

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-26
Configuring Port Parameters
Use the Port Configuration menus to set or display communication
parameters for any port or module in the switch.
Port Configuration : Port 1 - 12
==================
Flow Control on all ports : [Enable] [Disable]
Port Type Admin Flow Control Speed and Duplex
--------------------------------------------------------
1 10/100TX ENABLED DISABLED AUTO
2 10/100TX ENABLED DISABLED AUTO
3 10/100TX ENABLED DISABLED AUTO
4 10/100TX ENABLED DISABLED AUTO
5 10/100TX ENABLED DISABLED AUTO
6 10/100TX ENABLED DISABLED AUTO
7 10/100TX ENABLED DISABLED AUTO
8 10/100TX ENABLED DISABLED AUTO
9 10/100TX ENABLED DISABLED AUTO
10 10/100TX ENABLED DISABLED AUTO
11 10/100TX ENABLED DISABLED AUTO
12 10/100TX ENABLED DISABLED AUTO
<APPLY> <OK> <CANCEL> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrows keys to move. <Space> to scroll options.
Parameter Default Description
Flow Control
on all ports Disabled See “Flow Control” in this table.
Type Shows port type as:
10/100TX : 10BASE-T / 100BASE-TX
100FX :
100BASE-FX
1000SX : 1000BASE-SX
Admin Enabled Allows you to disable a port due to abnormal
behavior (e.g., excessive collisions), and then
re-enable it after the problem has been
resolved. You may also disable a port for
security reasons.