SMC Networks TigerSwitch SMC6948L2, Management Manual

Page: 43 / 166

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-27
Viewing the Current Port Configuration
The Port Information screen displays the port type, status, link
state, and flow control in use, as well as the communication speed
and duplex mode. To change any of the port settings, use the Port
Configuration menu.
Flow Control Disabled Used to enable or disable flow control. Flow
control can eliminate frame loss by “blocking”
traffic from end stations or segments connected
directly to the switch when its buffers fill. IEEE
802.3x flow control is used for full duplex. Note
that flow control should not be used if a port is
connected to a hub.
Speed and
Duplex Auto Indicates current port speed and duplex mode.
Note that Auto-negotiation is not available for
the 100BASE-FX ports. 100BASE-FX is fixed at
100 Mbps, full-duplex. And while 1000BASE-SX
does auto-negotiate duplex mode and flow
control, its speed is fixed at 1000 Mbps.
Port Information : Port 1 - 12
================
Port Type Operational Link FlowControl Speed and
InUse Duplex InUse
-------------------------------------------------------------
1. 10/100TX YES UP NONE 100-FULL
2. 10/100TX YES UP NONE 100-FULL
3. 10/100TX YES UP NONE 100-FULL
4. 10/100TX YES UP NONE 100-FULL
5. 10/100TX YES UP NONE 100-FULL
6. 10/100TX YES UP NONE 100-FULL
7. 10/100TX YES UP NONE 100-FULL
8. 10/100TX YES UP NONE 100-FULL
9. 10/100TX YES UP NONE 100-FULL
10. 10/100TX YES UP NONE 100-FULL
11. 10/100TX YES UP NONE 100-FULL
12. 10/100TX YES UP NONE 100-FULL
<APPLY> <OK> <CANCEL> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Default Description