SMC Networks TigerSwitch SMC6948L2, Management Manual

Page: 44 / 166

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-28
Using the Spanning Tree Algorithm
The Spanning Tree Algorithm can be used to detect and disable
network loops, and to provide backup links between switches,
bridges or routers. This allows the switch to interact with other
bridging devices (that is, an STA-compliant switch, bridge or router)
in your network to ensure that only one route exists between any two
stations on the network. For a more detailed description of how to
use this algorithm, refer to “Spanning Tree Algorithm” on page 4-2.
Parameter Description
Type Shows port type as:
10/100TX : 10BASE-T / 100BASE-TX
100FX :
100BASE-FX
1000SX : 1000BASE-SX
Operational Shows if the port is functioning or not.
Link Indicates if the port has a valid connection to an
external device.
FlowControl InUse Shows the flow control type in use. Flow control
can eliminate frame loss by “blocking” traffic
from end stations connected directly to the
switch. Back pressure is used for half duplex
and IEEE 802.3x for full duplex. Note that flow
control should not be used if a port is connected
to a hub.
Speed and DuplexInUse Displays the current port speed and duplex
mode used. (Note that Auto-negotiation is not
available for 100BASE-FX ports.)
Spanning Tree Configuration : Selection Menu
============================================
STA Bridge Configuration ...
STA Port Configuration ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.