SMC Networks TigerSwitch SMC6948L2, Management Manual

Page: 21 / 166

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-5
802.1Q VLAN
Base Information Displays basic VLAN information, such as
VLAN version number and maximum VLANs
supported.
802.1Q VLAN Current
Table Information Displays VLAN groups and port members.
802.1Q VLAN Static Table
Configuration Configures VLAN groups via static
assignments, including setting port members,
or restricting ports from being dynamically
added to a port by the GVRP protocol. Note
that GVRP is not supported in the current
firmware release.
802.1Q VLAN
Port Configuration Displays/configures port-specific VLAN
settings, including PVID, ingress filtering, and
GVRP. Note that GVRP is not supported in the
current firmware release.
Port GARP Configuration* Configures settings used in multicast filtering.
Port GMRP Configuration* Configures GMRP multicast filtering.
Network Monitor Menu
Port Statistics Displays statistics on network traffic passing
through the selected port.
RMON Statistics Displays detailed statistical information for the
selected port such as packet type and frame
size counters.
Unicast Address Table Provides full listing for unicast addresses, as
well as search and clear functions.
Multicast Address
Registration Table* Provides full listing for multicast addresses, as
well as search and clear functions.
IP Multicast Registration
Table Displays all the multicast groups active on this
switch, including multicast IP addresses and
corresponding VLAN IDs.
Static Unicast Address
Table Configuration Used to manually configure host MAC
addresses in the unicast table.
Static Multicast Address
Table Configuration* Used to manually configure host MAC
addresses in the multicast table.
Restart System Restarts system with options to use POST, or
to retain factory defaults, IP settings, or user
authentication settings.
Menu Description