U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-36
Using a Mirror Port for Analysis
You can mirror traffic from any source port to a target port for
real-time analysis. You can then attach a logic analyzer or RMON
probe to the target port and study the traffic crossing the source
port in a completely unobtrusive manner. When mirroring port
traffic, note that the target port must be included in the same VLAN
as the source port. (See “Configuring Virtual LANs” on page 2-47.)
You can use the Mirror Port Configuration screen to designate a
single port pair for mirroring as shown below.
Designated
Port (ID)
The priority and number of the port on the designated
bridging device through which this switch must
communicate with the root of the Spanning Tree.
Mirror Port Configuration
=========================
Mirror Source Port : Port 1
Mirror Target Port : Port 2
Status
: DISABLED
<APPLY>
<OK>
<CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Description
Mirror Source Port
The port whose traffic will be monitored.
Mirror Target Port
The port that will duplicate or “mirror” all the
traffic happening on the monitored port.
Status
Enables or disables the mirror function.
Parameter
Description
Summary of Contents for TigerSwitch SMC6948L2
